Archive for the ‘DIY’ Category

Make Your Own Animated Pong Clock

By Chris Scott Barr

While not the first video game in existence, Pong was the first widely-successful video game and is responsible for kick-starting the video game industry. It’s natural to want to pay homage to this gaming legacy in a variety of ways. We’ve seen a few Pong clocks in the past, but this is the first DIY kit I can recall coming across.

Not only does this purchase net you a cool clock that will make you the envy of your geeky friends, but it gives you a fun little project. It’s a fairly simple kit that even a beginner should be able to tackle in 2-3 hours. There’s just something about the satisfaction you get when you assemble something like this on your own (even if it did come from a kit). The going rate for one of these is $80, but unfortunately you’ll have to be patient. It looks like everyone else wanted one to, as they’re currently sold out.

[ Adafruit ] VIA [ GeekAlerts ]

BigShot DIY Digital Camera Kit

By Evan Ackerman

I wasn’t alive back in the day when someone with no specific tools or knowledge could open something up to fix it or just figure out how it worked. Nowadays, electronics come plastered with dire warnings about how opening the case will void your warranty, destroy the device, and kill you and your pets. This is really too bad, because one of the ways that people learn, or specifically that kids learn, is by experimentation. With this in mind, the Computer Vision Lab at Columbia University has developed the BigShot camera, which comes in a kit designed for kids to assemble while learning about cameras specifically and electronics in general:

The camera can be powered with a battery or with a dynamo, where 6 cranks = 1 picture, a feature I’d love to have in any or all of the cameras I use. It’s also got lenses on a rotating wheel, including a wide angle lens and a prism for taking stereo pictures. It goes beyond just a buildable camera kit, though… The overall mission of the BigShot project aims to keep the camera cheap enough that they’ll be available to kids worldwide, and to create an online social environment of sorts to share photos and teach the principles of photography.

The viability of this whole thing probably depends on what the final price of the BigShot ends up being. It’s currently still in a final testing phase, and my guess is that it’ll end up in about the same place as the OLPC… Great idea, but about twice as expensive as it ideally should be.

[ BigShot ] VIA [ Make ]

Gallery: Sony Gadget Teardown Porn

Like humans, dead gadgets get autopsies, too — only we call such hardware dissection “teardowns.” But why do we rip our beloved gadgets to pieces? To learn more about the nature of technology, engineering and industrial design, of course.

It’s kind of a beautiful thing, actually: staring at a gadget’s ugliest internal parts to learn its secrets.

To celebrate teardown culture, we hosted a contest in collaboration with teardown company iFixit, and 19 people participated (20, if you include a hilariously failed attempt). The rules were simple: Disassemble a Sony gadget, take photos of each step, and post the results.

Why Sony? Because the company makes some of the most elegantly designed hardware out there, and we were curious to see what lurked beneath the products’ sleek exteriors. Also because Sony told iFixit that it doesn’t like its products being torn apart publicly like this, and we couldn’t resist a challenge like that.

IFixit is handing out two awards to the winners: a PS3 Slim for “Best Overall Teardown,” and a PSP Go for “Most Creative Teardown,” Check out photos of the two winners, as well as eight other teardowns we found thoughtful, clever and impressive.

Thanks to all 20 who participated!

The winner of “Most Creative Teardown” goes to iFixit author Bac, who disassembled a vintage Sony TR-63 transistor radio. Not only were we shocked at the author’s ballsiness for ripping up this valuable antique; we were wowed by the old-school circuit board, which looks like an array of colorful beetles and worms.

Photo: Bac/iFixit

Korg Nanokey controller repurposed into MIDI foot pedal

Korg’s Nanokey MIDI controller is pretty awesome in its own right, but using it with your feet gets a little difficult under “normal” conditions. We can’t say for certain why Marc Fischer decided to convert his perfectly good control board into a MIDI foot pedal, but frankly, that’s beside the point. The point is he did it, and he did it with just a bit of ingenuity, some wooden blocks for risers and a bit of Plexiglas to cover up the missing keys. Hit the read link if you’re interested in doing something similar, and feel free to ask the man himself where that gorgeous shag carpet came from. Kinky!

[Via MAKE]

Filed under: Misc. Gadgets

Korg Nanokey controller repurposed into MIDI foot pedal originally appeared on Engadget on Wed, 28 Oct 2009 16:20:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

Machined Gear Clock makes watching the time pass a true joy (video)

We’ve seen no shortage of homegrown clocks in our day, and while most are cute for their time, few are worthy of being lauded in this manner. Alan Parekh’s Gear Clock is a delightful mishmash of machined gears, thrown together in a fashion that resulted in an actual time-telling gizmo. Hop on past the break to watch this thing spin, but be sure to hold the mute button for the lead-in. Clearly ‘Sound Check’ wasn’t activated.

Continue reading Machined Gear Clock makes watching the time pass a true joy (video)

Filed under: Misc. Gadgets, Household

Machined Gear Clock makes watching the time pass a true joy (video) originally appeared on Engadget on Wed, 28 Oct 2009 03:58:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

« Older Entries    Newer Entries »