Tools 'N Gadgets
Store

1. Do not let the filter dry out. When the pitcher is empty, you should refill the reservoir right away. When the pitcher is full or partly full, the bottom of the filter is in the water and keeping moist.

2. The filter needs to be soaked and flushed exactly according to directions. Some of the charcoal packing comes off in the flushing process, and if you don't take care of it, you will have specks in the water. This is no big problem, just something to be aware of.

3. Never put overly warm or hot water through the filter.

If you follow the directions, you will have, as we did, gallons of water that cost a lot less and taste as good or better than the water you buy in plastic containers in the supermarket.


best filter I've found   December 23, 2002
 38 out of 41 found this review helpful

In California the water tends to be very hard. I purchased an under the sink two stage water filtration system and thought the problem would be solved. The water still tasted bad so I bought a Brita pitcher filter. Unbelievable! It tasted so good. I think it's because each filter has silver oxide particles mixed in with the charcoal and it softens the water very well. I wish I would have tried this filter first.

Since moving to the east coast I still find that these filters do a great job at making the water taste as good or better than bottled water at a fraction of the cost.


Improved filters easier to tell when to change out!   May 9, 2000
 19 out of 20 found this review helpful

The Brita filters are an excellent lower-end water purification system. They work quite well in most cases and these new filters come with a guide that indicates when it is time to change the filter. This is a marked improvement over the old method of going by calendar days based on the number of times you fill the pitcher per day.


Micron rating of filter cartridge   September 30, 2000
 19 out of 21 found this review helpful

I noticed that the Brita cartridges did not take out a lot of color from the water I put in. Later I found out that it was rated Class 5 on NSF's scale - by looking up the NSF site, Class 5 means 85% reduction of particles between 30 to 50 microns. The scale is a 6-step scale with Class 1 being the best. After checking with the Greater Vancouver Water District, our sediment particle size in the water averages 2.5 microns - No wonder the water coming through the cartridges is still yellowish brown in color!


Better Water   August 9, 2006
 19 out of 19 found this review helpful

The Brita pitcher water filtering system is a good idea if you have problems with your tap water. Filtered water is a much lower cost than bottled water and as long as your tap is running, you can have an almost endless supply.
I live in New York City. The water quality is variable at best. The city constantly monitors water and "adjusts" additives to combat bacteria and other pollutants. Often, especially in the summer months, the chlorine level is very high.
The Brita filter takes care of the chlorine problem and removes other additives, as well.
The result is clear, fresh & pure tasting water that is excellent for drinking, cooking, beverage making and ice cubes (bad ice cubes can ruin a drink.)
Heed the instructions about filter replacement. The filters are rated at 40 US gallons each. If you exceed the recommended filter "life", you will definitely notice diminished results. This is especially noticeable with chlorinated water. The smell returns and the filtered water does not taste as good any more.
All-in-all, this is an excellent filter, but it's no speed demon.
The only real problems I've noticed are with the pitcher timer breaking and the poor results if you leave the filter in the pitcher too long (beyond the 40 gallon estimated limit.)
Also, do not allow the filter to dry out once you've started using it.
Buying the larger packages of filters saves money and is worth it, in the long run.